Blog

To determine whether a floor is suitable for colored sand floor coatings, comprehensively evaluate the following key indicators: 1. Foundation Condition Testing Flatness Requirements Use a 2-meter straightedge to check for gaps ≤ 3mm. Local depressions require repair with epoxy mortar. Base Strength Concrete strength must be ≥ C25, with pull-off adhesion ≥ 1.5 MPa. Sanded surfaces require sandblasting. Moisture Content Control Base moisture content must be ≤ 8% (tested with plastic film). A moisture barrier is required for humid environments. 2. Environmental Adaptability Environment Type Suitability Criteria Industrial plants must pass the Taber abrasion test (abrasion loss ≤ 0.02g). Food processing plants must pass the acid and alkali resistance test (no change after 72 hours of immersion in 5% NaOH/5% H₂SO₄). Medical facilities Antibacterial performance testing is required (antibacterial rate ≥ 99%). 3. Special Scenarios Areas with large temperature fluctuations: Thermal expansion coefficient testing is required (recommended ≤ 8 × 10⁻⁶/°C). Heavy-load areas: Compressive strength ≥ 90 N/mm² is required; additional reinforcement mesh is recommended. 4.Pre-construction Pretreatment Oil-contaminated surfaces require flame treatment (residual oil stains ≤ 5 cm²/m²). Old floors require polishing to expose a fresh base surface (roughness Ra ≥ 50 μm). Expansion joints require elastic adhesive filling (displacement ≥ 5 mm). Note: It is recommended to conduct a sample test 48 hours before construction to observe the curing effect and color difference.

From substitution to transcendence: the technological evolution and commercial value of marble epoxy colored sand floor paint 1. Data Perspective on the Industry's Explosive Growth Epoxy colored sand flooring has reached 38.7% of the high-end decoration market, a nearly fivefold increase from 2022. Its core driving forces are: Cost Advantage: The comprehensive cost per square meter (including construction) is 42% of that of natural marble. 2.Core Technology Analysis: Industrial Applications of Bionics Microcapsules (particle size ≤ 0.1μm) encapsulate color paste, forming a crystal structure during curing, accurately replicating the mineral inclusion characteristics of natural stone. Intelligent Construction System Laser Leveling Robot: Flatness error ≤ 0.3mm/2m Temperature-Controlled Curing Chamber: Enables all-weather construction at temperatures between 5°C and 35°C 3.Three major technological breakthroughs in 2025: Self-healing coating: Surface scratches containing microcapsules of healing agents can be automatically repaired within 48 hours. Photovoltaic flooring system: A transparent conductive coating combined with colored sand achieves a power generation efficiency of 8.3%. Odor neutralization technology: Adding photocatalyst particles decomposes formaldehyde with a 92% efficiency.

Why do kitchens require special flooring materials? High-frequency use: The kitchen is the center of family activities, and its flooring endures the rigors of daily cooking. Common challenges: Frequent spills of stubborn stains such as oil, sauces, and colorings; Impacts from cooking steam and high temperatures; Risk of heavy objects such as pots and utensils falling; Prolonged standing cooking requires a comfortable and durable floor Advantages of epoxy colored sand floor paint: 1.Excellent stain resistance and easy cleaning. The dense surface prevents oil and sauce from penetrating. Cleans easily with a single wipe, saving time and effort. Inhibits bacterial and mold growth, meeting kitchen hygiene standards. 2.Excellent waterproof and moisture-proof properties. Forms a seamless waterproof layer, completely preventing water vapor penetration. Protects the base from moisture. Ideal for kitchens that require frequent cleaning. 3.Abrasion-resistant and pressure-resistant for durability. Excellent mechanical properties withstand heavy impacts. Resists friction and wear from sliding tables and chairs. Maintains like-new condition over extended use. 4.Non-slip safety reduces potential safety hazards. The subtle texture provides excellent anti-slip properties. Remains safe even with moisture or oil stains. Ideal for homes with elderly and children. 5.Beautiful and diverse design enhances taste. A wide selection of colors complements various kitchen styles, blending seamlessly with modern minimalist to rustic styles. Enhances the overall aesthetic and value of your kitchen. 6.Easy installation and maintenance. Simple installation process and short construction time. Daily cleaning requires only a mop with water. Stubborn stains can be cleaned with a neutral detergent. 7.High cost-effectiveness and long-term benefits. Initial investment yields long-term value. Reduces daily maintenance costs and time. Long service life and outstanding value.

If you want to create a stunning water-based epoxy art floor paint, professional and standardized construction is essential. Next, we will disassemble the entire process from preliminary preparation to final completion to help you achieve the ideal floor effect. 1. Careful preparation before construction  Floor base treatment  Make sure the floor is dry and flat, and thoroughly remove oil, dust, loose particles and other debris.  For old floors, use a grinder to polish, remove old coatings and floating slurry, so that the floor forms a uniform rough surface and enhances adhesion.  If there are cracks or depressions on the floor, repair it with epoxy mortar, and polish it again after drying.  Preparation of construction tools and materials  Prepare construction tools such as rollers, scrapers, spray guns, and mixers to ensure that the tools are clean and free of impurities.  Strictly follow the proportions in the product manual, mix the main agent and curing agent, add color paste to mix the color according to the requirements of the artistic effect, and the prepared paint must be used up within the specified time.​ 2. Orderly construction process​ Primer application​ Use a roller to evenly roll the prepared water-based epoxy primer on the treated floor to ensure uniform coating thickness without missing or dripping. ​ The drying time of the primer is usually 4-8 hours (depending on the ambient temperature and humidity). The next step can be carried out after drying. ​ Mid-coat application​ Mix the water-based epoxy mid-coat material with an appropriate amount of quartz sand and apply it with a scraper. ​ It can be applied multiple times according to the designed thickness. Each time, you need to wait for the previous layer to dry completely. After the mid-coat is completed, the floor will form a rough surface to prepare for the topcoat application. ​ Topcoat application​ If you want a pure color effect, directly use a roller to evenly roll the prepared topcoat. ​ If you need artistic texture, use tools such as spray guns and scrapers, such as spray guns to create a gradient effect, and scrapers to create irregular geometric textures. Pay attention to the speed and coating uniformity during construction to avoid color difference and unevenness.​ 3. Finishing touches of surface treatment and maintenance Surface treatment (glazing) After the topcoat is applied, roll or spray the water-based epoxy glazing paint evenly on the surface of the topcoat to form a transparent protective film. ​ After the glazing paint dries, it improves the wear resistance, stain resistance and glossiness of the floor, enhances the UV resistance and delays aging. ​ Maintenance The maintenance period is generally 7-10 days. During this period, avoid the floor from being hit by heavy objects or scratched by sharp objects. People and vehicles are prohibited from walking on uncured floors. ​ Keep the room well ventilated to ensure that the floor paint is fully cured to achieve optimal performance.

Among materials that are both beautiful and practical, water-based epoxy art floor paint has attracted much attention due to its unique advantages. The following is a detailed analysis of this material from multiple dimensions: 1. Excellent environmental performance, a healthy and safe choice Water-based epoxy art floor paint uses water as a diluent. Compared with traditional solvent-based floor paint, it greatly reduces volatile organic compound (VOC) emissions and effectively solves the problem of air pollution. The product is odorless and non-toxic, meets national environmental protection standards, and is suitable for places with high environmental protection requirements such as homes, schools, and hospitals to ensure the health and safety of personnel. 2. Strong artistic expression, creating a personalized space Through different construction processes and color matching, it can present the luxury of marble texture, the naturalness of wood grain, and modern visual effects such as abstract art and geometric patterns. According to different styles and needs of commercial spaces, office spaces, home environments, etc., exclusive floor decoration plans can be customized to enhance the style of the space.​ 3. Excellent physical properties, strong and durable​ It has high strength, high wear resistance and good impact resistance. It can withstand the pressure of pedestrians, furniture handling, vehicle driving, etc. It is not easy to scratch, wear and crack. ​ The surface is smooth and dense, with good stain resistance and corrosion resistance. It is difficult for water stains, oil stains and chemical reagents to penetrate. It is easy to clean and maintain, reducing the later cost. ​ 4. Convenient construction, efficient and worry-free​ The construction process is relatively simple, the construction period is short, and the floor laying and decoration can be completed in a short time. ​The requirements for ambient temperature and humidity are loose, and construction can be carried out in an environment of 5℃ - 35℃. The drying speed is fast and the project progress is shortened. ​ There is no large amount of dust and noise during the construction process, and the impact on the surrounding environment is small. It is suitable for places with dense personnel or high requirements for the construction environment. ​ 5. Wide range of application scenarios​ Commercial fields: such as shopping malls, supermarkets, specialty stores, etc., unique artistic design can attract customers and enhance the competitiveness of commercial space. ​ Office space: Create a fashionable and comfortable environment to stimulate employees' enthusiasm and creativity.​ Home decoration: suitable for living room, bedroom, kitchen, bathroom, etc., showing the owner's personality and taste. ​ Public space: in schools, hospitals, museums, exhibition halls and other places, its environmental protection performance and artistic beauty can be fully utilized.

If you want to learn more about oil based retro floor paint, from product characteristics to purchase points, to market trends, every aspect is worth exploring in detail. Core product features Rich texture effects: A highlight of retro floor paint is that it can present a variety of realistic texture effects. Through special formulas and advanced construction processes, it can simulate the aging effect of cement, from slight wear marks to severe cracking and peeling, which can be vividly displayed, as if the ground has really experienced decades of polishing. For metal rust effects, it can accurately restore the color layers and mottled texture of rust, from dark red to brown and yellow, to black rust, making the ground look like a piece of metal plate that has experienced wind and rain. Retro floor paint with imitation stone texture is also not inferior, whether it is the delicate texture of marble or the rough grain of granite, it can be perfectly reproduced. Excellent physical properties: Retro floor paint performs well in physical properties. Its high wear resistance enables it to withstand frequent daily trampling and furniture movement, and it can maintain a good appearance for a long time in commercial places with large traffic, as well as living rooms, corridors and other areas in the home. Good impact resistance means that even if heavy objects accidentally fall, the ground is not easy to be damaged. In some factory workshops, the use of retro floor paint not only meets the requirements of industrial production for ground strength, but also adds a unique retro style to the workshop. In addition, it has strong chemical corrosion resistance and can effectively resist common stains and liquid erosion, such as coffee stains, oil stains, water stains, etc. Environmental protection performance: With the continuous improvement of people's environmental awareness, the environmental protection requirements for decoration materials are becoming more and more stringent. Most high-quality retro floor paints are produced with environmentally friendly materials, and strict control is exercised in the selection of raw materials. Raw materials containing harmful substances such as benzene and formaldehyde are not used. In the production process, advanced technology is used to reduce the emission of pollutants. In addition, these products have passed relevant environmental protection tests and obtained corresponding environmental protection certifications, such as China Environmental Labeling Product Certification. This means that after using retro floor paint for floor decoration, it will not have a negative impact on indoor air quality, and can protect the health of residents or users. For families with elderly people and children, or places such as schools and kindergartens, it is particularly important to choose environmentally friendly oil based retro floor paint. ​

In order for Oil-based epoxy retro floor paint to present an ideal effect, construction and maintenance are crucial. Construction preparation and process Base treatment: Before construction, ensure that the ground is flat, dry, and free of oil and dust. Grind and repair uneven areas to lay a good foundation for subsequent construction. Primer construction: Apply primer evenly to allow it to fully penetrate the base layer, enhance the adhesion between the coating and the ground, and ensure the overall quality. Topcoat construction: Choose scraping, spraying or brushing according to the desired retro effect. When creating a mottled effect, you can apply it in layers, and create natural aging traces by superimposing and wiping different colors of topcoats. Glazing treatment: After the construction is completed, apply wear-resistant glazing paint to improve the gloss and wear resistance of the ground and extend its service life. Construction precautions: The construction of retro floor paint has strict environmental requirements. The construction temperature should be controlled at 5℃ - 35℃, and the relative humidity should not be higher than 85% to avoid environmental factors affecting the construction quality. At the same time, construction workers need to have certain experience and skills and strictly follow the specifications. ​ Daily maintenance points ​ Cleaning method: Use a soft mop or vacuum cleaner to clean dust and debris daily, and avoid using hard tools to scratch the ground. Stain treatment: Use neutral detergent to clean stubborn stains, and prohibit acidic and avoid using hard tools to scratch the ground. Stain treatment: Use neutral detergent to clean stubborn stains, and prohibit acidic and alkaline detergents to prevent corrosion of the floor paint surface. ​ Protective measures: Place floor mats at the door to reduce the wear of sand and gravel on the ground; avoid sharp objects directly contacting the ground; wax and maintain regularly to keep the ground in good condition. ​ Actual case display: A cultural and creative park uses retro floor paint to simulate the mottled texture of the cement floor of the old factory, which perfectly integrates with the art installations and cultural and creative shops in the park, attracting a large number of tourists to check in; a Nordic-style house, the bedroom uses light gray retro floor paint, matched with white furniture and green plants, creating a simple and retro warm atmosphere, becoming a haven for the owner to relax.

In the world of decoration materials, the choice of wall paint directly affects the texture and life of the space. In recent years, a "dark horse" product with both environmental performance and excellent quality, water-based epoxy colored sand topcoat, has quickly become popular with its unique advantages and has become a favorite of designers and home improvement enthusiasts. Today, let's take a deep look at this wall renewal artifact and explore its charm. 1. Environmental performance: redefining healthy home Traditional solvent-based paints release a large amount of volatile organic compounds (VOCs) during construction and use. These harmful substances will not only cause serious pollution to indoor air quality, but also pose a potential threat to the health of residents. Water-based epoxy colored sand topcoat uses water as a dispersion medium, abandons the use of organic solvents, reduces VOC emissions from the root, and allows the renovated space to quickly meet environmental protection standards. Even if there are elderly people, children and pregnant women at home, they can live in with peace of mind. According to the test of professional institutions, the environmental protection indicators of high-quality water-based epoxy colored sand topcoat are far better than the national standards, and it has truly achieved "immediately live in after painting", building a green and healthy protective wall for the family. 2. Excellent performance: wear-resistant and stain-resistant, long-lasting Water-based epoxy colored sand topcoat can be called an "all-round player" in terms of performance. Its high-strength paint film structure gives it excellent wear resistance. Whether it is frequent household cleaning or the collision and friction of daily objects, it is difficult to leave marks on the wall. It is especially suitable for living rooms, corridors and other areas where people move frequently. At the same time, it also has strong stain resistance. In the face of children's graffiti, coffee stains, handprints and other stains, just wipe them gently with a damp cloth, and they can be easily removed, so that the wall is always clean and new. In addition, this topcoat also has excellent chemical corrosion resistance, and is not afraid of the erosion of acid and alkali substances. Even if it is used in special environments such as kitchens and bathrooms, it can maintain a good performance state for a long time, greatly extending the service life of the wall. 3. Color and texture: create a personalized aesthetic space Water-based epoxy colored sand topcoat not only has outstanding performance, but also has great expressiveness in color and texture. The rich color system covers from the fresh and elegant Morandi color system to the fashionable and cool macaron color system, and then to the classic and calm earth color system, which can meet the decoration needs of different styles. Whether it is to create a warm and comfortable Nordic style, a simple and atmospheric modern style, or a retro and gorgeous European style, you can find a color scheme that matches it. In addition to the variety of colors, its unique colored sand texture adds a different charm to the wall. Under the irradiation of light, the delicate colored sand particles will show a soft luster and rich layering, making the wall no longer monotonous, like a three-dimensional art painting. Moreover, through different construction processes, it can also create a variety of effects such as frosting, matte, and gloss, allowing you to easily achieve personalized aesthetic space design. 4. Easy to construct: even without experience, you can easily start Many people worry that the construction of water-based epoxy colored sand topcoat is difficult, but in fact, this concern is completely unnecessary. Its construction process is similar to that of ordinary wall paint. Even novices with no decoration experience can achieve ideal results as long as they follow the correct steps. Before construction, just make sure that the wall base is flat, dry, free of oil and dust; during construction, you can use brushing, roller coating or spraying to choose the appropriate construction method according to your preferences and actual needs. It is worth mentioning that water-based epoxy colored sand topcoat dries quickly, generally the surface drying time is about 2-4 hours, and the actual drying time is only 24 hours, which greatly shortens the construction cycle and allows you to see the decoration results faster.  Water-based epoxy colored sand topcoat has redefined the standard of wall paint with its many advantages such as environmental protection and health, excellent performance, rich colors, convenient construction and wide application scenarios. If you are worried about the selection of materials for wall decoration, you might as well consider this "treasure" product. I believe it will definitely bring unexpected surprises to your space and make every wall a classic of space aesthetics!

Water-based epoxy colored sand topcoat can shine in various scenes with its diverse performance and rich expressiveness. The following practical application cases in different scenes will take you to intuitively feel its charm and practicality. 1.Warm home scene: create a comfortable living space  Living room wall decoration In a modern and simple living room, choose light gray water-based epoxy colored sand topcoat with white plaster line to create a simple and atmospheric atmosphere. The delicate texture of colored sand flickers slightly under the light, adding a sense of refinement to the space. The TV background wall uses dark gray water-based epoxy colored sand topcoat, which is treated with a special roughening process to create a unique texture, making it the visual focus of the living room. Whether it is a family gathering or daily leisure, such a wall can make people feel comfortable and cozy. Children's room wall design The wall of the children's room should be colorful and environmentally friendly and safe. Choose a pink water-based epoxy colored sand topcoat, paired with hand-painted cartoon patterns, to create a dreamy growth space for your children. Its excellent stain resistance allows children to give full play to their imagination and graffiti on the wall, and parents do not need to worry about it being difficult to clean. Moreover, the environmental performance of water-based epoxy colored sand topcoat can escort the healthy growth of children. 2. Commercial space scene: enhance brand image Internet celebrity coffee shop wall decoration A Internet celebrity coffee shop that focuses on retro industrial style uses dark brown water-based epoxy colored sand topcoat on wall decoration, and creates a texture of years of precipitation through aging treatment. The exposed red bricks and dark walls complement each other, and with warm yellow lights, they instantly attract the attention of customers and become a popular check-in point. The wear-resistant and stain-resistant performance of water-based epoxy colored sand topcoat can also cope with the frequent flow of people and friction between tables and chairs in the coffee shop, keeping the wall beautiful for a long time. Brand store wall design In order to highlight the elegance and fashion sense of the brand, a fashion women's clothing store chose off-white water-based epoxy colored sand paint as the main color of the wall, matched with golden decorative lines, to create a high-end shopping environment. In the display area, colorful water-based epoxy colored sand paint is used to create a unique background wall, which complements the displayed clothing, effectively improves the display effect of the goods, and enhances the customer's desire to buy. 3.Industrial site scene: achieve efficient protection Factory workshop wall protection In the mechanical processing workshop, the wall is often polluted and collided by oil, iron filings, etc. The stain resistance and wear resistance of water-based epoxy colored sand paint play an important role here. The use of gray water-based epoxy colored sand paint can not only effectively resist the erosion of oil and iron filings, but also its high-strength paint film can prevent the wall from being damaged by equipment collision, reducing the maintenance cost and frequency of the wall, and creating a clean and safe production environment for the factory. Warehouse wall treatment The handling and storage of goods in the warehouse can easily cause wear and tear on the wall. Using water-based epoxy colored sand topcoat for wall treatment can greatly improve the wear resistance and scratch resistance of the wall. At the same time, its stain resistance also facilitates daily cleaning and keeps the warehouse wall clean. Moreover, water-based epoxy colored sand topcoat can choose different colors according to the functional divisions of the warehouse, which is convenient for the classification and management of goods and improves storage efficiency. From warm homes to bustling commercial spaces to busy industrial sites, water-based epoxy colored sand topcoat has shown strong adaptability and practicality. Have these practical application cases brought you new inspiration? If you also have decoration needs for specific scenes, please share and discuss more exciting application solutions together!

1. Environmental regulations are becoming stricter: The green gene of water-based epoxy is a pass Water-based epoxy uses water as a diluent, and its emissions are much lower than traditional oil-based epoxy, which can easily meet the increasingly stringent global and local environmental regulations to avoid fines and shutdown risks. Environmentally friendly construction: There is no obvious irritating odor, which greatly improves the operating environment of workers. It is especially suitable for sensitive places such as hospitals, schools, shopping malls, and office buildings that need to be operated while being renovated. 2. Pain points of renovation construction: Water-based epoxy provides efficient solutions Stronger adaptability to wet substrates: Renovation projects often face incomplete drying of the base layer (such as underground environments and old buildings). Water-based epoxy has excellent wet adhesion and can be well cured on wet substrates. Excellent recoating performance: For common local repairs or future renovations, water-based epoxy has good interlayer adhesion, saving time and effort. Convenient and safe construction: Tools can be directly washed with water, making construction more convenient; non-flammable, safer to store and transport. 3. Excellent performance: meet the stringent use requirements after renovation Tough and wear-resistant: Modern water-based epoxy technology is very mature, and its physical and mechanical properties (hardness, wear resistance, impact resistance) are comparable to or even exceed some oil-based products. Excellent adhesion: It has good adhesion to a variety of common renovation base surfaces (concrete, terrazzo, old epoxy coatings, tiles, etc. Good chemical resistance: It can resist the erosion of daily detergents, grease, weak acids and alkalis, and is easy to clean and maintain. Beautiful and diverse: It provides different glosses such as matte and gloss, with rich and stable colors.

In the modern transportation system, clear and eye-catching road markings are important infrastructure to ensure traffic safety. Whether it is the hustle and bustle of the city or the traffic in the countryside, road markings are like silent guides, guiding vehicles and pedestrians to pass in an orderly manner. Among the many road marking materials, water-based acrylic road marking paint has gradually become a "star product" in the field of road marking with its unique performance and environmental advantages. 1. The core advantages of water-based acrylic road marking paint Excellent environmental performance Traditional solvent-based marking paint releases a large amount of volatile organic compounds (VOCs) during production and use. These substances not only threaten the health of construction workers, but also aggravate air pollution, form photochemical smog, and harm the ecological environment. Water-based acrylic marking paint uses water as a solvent, contains almost no organic solvents, and has extremely low VOCs emissions. It meets the requirements of national environmental protection policies and is a typical representative of green and environmentally friendly coatings. During the construction process, there is no pungent odor, which can effectively improve the construction environment and reduce the impact on surrounding residents and ecology.​ Excellent physical properties​ Water-based acrylic marking paint has good wear resistance and weather resistance. Road markings are exposed to the outdoors for a long time, and are subjected to frequent vehicle rolling, sun and rain, wind and snow erosion, etc. Ordinary paints are prone to wear and fading. With its special formula and molecular structure, water-based acrylic marking paint can form a tough paint film on the road surface. Even on roads with heavy traffic, it can remain clear and complete for a long time, greatly reducing the maintenance frequency and cost of road markings. In addition, the marking paint also has excellent adhesion and can firmly adhere to a variety of road substrates such as cement and asphalt, and is not easy to peel off. ​ Fast drying speed​ In road construction, time is efficiency. The fast drying speed of water-based acrylic marking paint gives it a significant advantage in practical applications. Under normal circumstances, it can be dry on the surface 10-30 minutes after construction at room temperature, and it can be completely dry in 1-2 hours, which greatly shortens the construction time and reduces the impact of road closures on traffic. It is particularly suitable for places such as urban roads and airport runways that have strict requirements on construction time.​ 2. Wide application areas​ Road traffic markings​ On urban roads, highways, national and provincial roads and other types of roads, water-based acrylic marking paint is an ideal material for marking traffic lines. It can clearly mark lane demarcation lines, edge lines, guide arrows, pedestrian crossing lines, etc., provide clear traffic guidance for drivers and pedestrians, regulate traffic order, and reduce the occurrence of traffic accidents. At the same time, its good reflective performance can make the markings clearly visible at night or in low light conditions, further ensuring driving safety. ​ Parking lot and garage markings​ Parking lots and garages are concentrated areas for vehicle parking. The clarity of the markings directly affects the parking efficiency and safety of vehicles. Water-based acrylic marking paint can be used to divide parking spaces, lane lines, entrance and exit indicator lines, etc., which can not only make the parking lot layout more reasonable and orderly, but also guide vehicles to park accurately through eye-catching colors and clear lines to avoid scratch accidents. In addition, its environmental protection characteristics also meet the use requirements of relatively closed spaces such as parking lots and garages.​ Sports field marking lines In various sports venues, such as basketball courts, tennis courts, football fields, etc., water-based acrylic marking paint is used to divide the boundaries of the venue, regional markings, etc. It has the characteristics of bright colors and long-lasting non-fading, which can provide athletes with clear venue boundaries and ensure the fairness and standardization of the competition. At the same time, good wear resistance and anti-slip properties can meet the needs of athletes in high-intensity sports and reduce the risk of sports injuries. ​ Other fields In addition to the above main application scenarios, water-based acrylic marking paint can also be used for factory workshop floor markings, school playground markings, commercial area sidewalk markings and other fields, providing clear and durable marking services for different places. ​ 3. Scientific construction methods Preparation before construction Before construction, the road surface needs to be thoroughly cleaned to ensure that the road surface is dry, clean, free of oil, dust and other impurities. Loose particles and attachments on the road surface can be removed by sweeping with a broom, washing with a high-pressure water gun or mechanical grinding. At the same time, check the flatness and roughness of the road surface. For uneven roads, repairs should be carried out to ensure the quality of the marking. In addition, it is necessary to prepare the equipment required for construction, such as marking machines, paint mixers, spray guns, etc., and debug the equipment to normal working conditions. ​ Preparation of paint​ According to the requirements of the product manual, mix the water-based acrylic marking paint with an appropriate amount of water and stir evenly. The amount of water added during the preparation process must be strictly controlled. Too much or too little will affect the performance and construction effect of the paint. At the same time, according to actual construction needs, an appropriate amount of reflective glass beads can be added to improve the reflective performance of the marking. When adding glass beads, they should be added evenly during the mixing process of the paint to ensure uniform dispersion. ​ Construction process​ When using a marking machine for construction, the parameters of the marking machine, such as nozzle size, paint flow, driving speed, etc., should be adjusted according to the width and shape of the marking line. During the construction process, the marking machine should be kept at a constant speed to avoid speed fluctuations or pauses in the middle to ensure uniform thickness and straight lines. For some complex marking patterns or irregular areas, a spray gun can be used for manual re-marking to ensure the integrity and accuracy of the markings. After the construction is completed, the construction equipment should be cleaned in time to avoid the paint from drying and clogging the equipment. ​ Maintenance after construction​ After the construction is completed, before the markings are completely dry and solidified, warning signs should be set up to prohibit vehicles and pedestrians from passing through to avoid damage to the markings. At the same time, pay attention to weather changes to avoid being affected by bad weather such as rain and sun exposure in a short period of time after construction. Generally, it takes about 24 hours for the markings to completely dry and solidify. During this period, the protection and inspection of the markings should be strengthened, and problems should be dealt with in a timely manner. ​ 4. Future development trends​ With the continuous improvement of people's environmental awareness and the increasingly stringent national environmental protection policies, the market demand for water-based acrylic marking paint will continue to grow. In the future, this product will develop in the direction of high performance and multi-functionality. For example, by improving the formula and production process, the wear resistance, water resistance, chemical corrosion resistance and other properties of the coating can be further improved; new water-based acrylic marking paints with self-repairing, self-cleaning, anti-skid and noise reduction functions can be developed to meet the special needs of different scenarios. At the same time, with the continuous development of intelligent construction equipment, the construction efficiency and quality of water-based acrylic marking paints will also be further improved, promoting the road marking industry to move towards a more intelligent and automated direction. ​ Water-based acrylic road marking paints play an increasingly important role in the field of road markings due to their environmental protection, excellent performance, and wide application. Whether it is to ensure traffic safety or to enhance the image of the city, it has made an indelible contribution. I believe that in the future, with the continuous advancement and innovation of technology, water-based acrylic marking paints will bring more convenience and safety to our lives.

Water-based epoxy orange grain topcoat has a place in the coating market with its unique decorative effect and practical performance. ​Environmental protection properties Safe and harmless: Using water as a solvent, it does not contain any harmful organic solvents, which eliminates the harm of volatile organic compounds to human health and the environment from the root. When furniture manufacturers use this paint to paint the surface of furniture, workers do not need to worry about pungent odors and harmful gases inhaled during the production process, which ensures occupational health; finished furniture will not release harmful substances after entering the home, creating a safe living environment for consumers. ​ Compliance with environmental regulations: It has passed a number of strict environmental certifications, such as the China Environmental Labeling Product Certification, etc. Whether in the domestic or international market, it meets various environmental regulations and provides strong support for the company's products to enter the market. ​   Performance highlights Unique decorative effect: It can form a concave and convex texture similar to the surface of orange peel. This unique orange grain effect brings rich layering and three-dimensionality to the surface of objects. In the coating of metal columns in the hotel lobby, the orange grain topcoat makes the originally monotonous metal surface artistic and enhances the style of the entire space; in the coating of equipment shells, the orange grain effect is not only beautiful, but also can effectively cover up the minor defects generated during the production process and improve the appearance quality of the product. ​ Good physical properties: It has excellent wear resistance and impact resistance. The concave and convex texture structure can disperse external forces. In daily use, even if it is slightly bumped or rubbed, the coating is not easily damaged. For example, after the outdoor billboard frame is coated with orange grain topcoat, it can still keep the coating intact in harsh environments such as wind, sun, sand and dust, and extend the service life of the billboard. At the same time, its corrosion resistance is also very excellent, and it can adapt to complex environments such as humidity, acid and alkali, and is suitable for surface protection of chemical equipment, coastal facilities, etc. ​   Key construction ​ Substrate pretreatment: Thoroughly clean the substrate before construction to remove impurities such as oil, rust, and dust. For metal substrates, sandblasting or shot blasting can be used to improve surface roughness and enhance coating adhesion; for wooden substrates, grinding and gap filling are required to ensure a smooth surface. ​ Spraying process control: Spraying is used for construction. By adjusting the caliber of the spray gun (commonly used caliber is 1.5 - 2.5mm), spraying pressure (generally controlled at 0.3 - 0.5MPa), spraying distance (recommended to be kept at 20 - 30cm) and other parameters, the size and density of the orange grain can be accurately controlled. For example, if you want to get a larger orange grain effect, you can increase the caliber of the spray gun and reduce the spraying pressure appropriately; if you want fine orange grain, do the opposite. At the same time, the temperature and humidity of the construction environment have a significant impact on the orange grain effect. The optimal construction temperature is 5℃ - 35℃, and the relative humidity is not more than 85%. Too high or too low temperature and humidity may cause uneven orange grain or poor drying of the coating. ​ Drying and curing: After spraying, the coating needs to be dried and cured in a suitable environment. Generally, the surface drying time is 1-2 hours, and the actual drying time is 24-48 hours. During the drying process, avoid dust and debris from contaminating the coating to ensure the final effect.