What is the wear resistance of water-based epoxy colored sand floor coating?

Abrasion Resistance Analysis of Waterborne Epoxy Colored Sand Floor Coatings

1. Abrasion Resistance Performance Indicators

Standard Test Data

A:Abrasion Resistance (750g/500r): Weight Loss ≤ 0.050g, Actual Measured Value 0.044g

B:Pencil Hardness Reaches 3H, Meeting General Load-Bearing Requirements

C:Some High-End Products Offer Hardness Up to 7H, Significantly Improving Abrasion Resistance

Industry Comparison

A:Abrasion Resistance (750g/500r): Weight Loss ≤ 0.04g

B:Thin-Coat Waterborne Epoxy Floor Coating: Weight Loss ≤ 0.02 g

2. Factors Affecting Abrasion Resistance

Material Ratio

A:Quartz sand content directly affects abrasion resistance

B:The ratio of epoxy resin to hardener affects coating hardness

Application Techniques

A:A mortar layer with a thickness of 1-5mm achieves optimal abrasion resistance

B:Self-leveling technology improves surface density

3. Actual Application Performance

Service Life

Thin-layer coatings offer a service life of 3-10 years

Mortar coatings offer a service life of 8-20 years

4. Application Scenarios

Suitable for light industrial environments (offices, shopping malls)

For heavy-duty environments (factory workshops), thicker coatings are recommended.