epoxy floor coatings

Households with pets often face the challenges of scratching, urine stains, and difficult-to-clean hair. Ordinary wood floors are scratch-resistant, and tile joints harbor hair. However, water-based epoxy colored sand floor paint, with its "hard texture, seamless surface, and acid and alkali resistance," is a perfect fit for pet-friendly homes. Today, we'll share practical tips for installing it in pet-friendly homes. 1. Choose the right parameters to handle pet damage. Choose a medium-sized sand particle size of 0.5-1mm: Fine sand (<0.3mm) is prone to scratching by pet claws, while coarse sand (>1.5mm) can easily trap hair in gaps. Medium-sized sand is both scratch-resistant and easy to clean. Choose a matte, wear-resistant finish: Matte surfaces are more scratch-resistant than glossy ones (preventing slippery scratching caused by reflective surfaces), and have a wear resistance of 2.5 hours or higher. Cats and dogs will not notice any scratching marks. Choose a neutral, stain-resistant color: Light gray and off-white colors tend to show fur, while dark black tends to show dust. Neutral colors like light brown and dark green are recommended. They will make pet hair and footprints less noticeable, reducing cleaning frequency. 2.3 Details to Solve Pet "Special Issues" Prevent Urine Stains: Apply an Acid- and Alkali-Resistant Topcoat: Pet urine is alkaline, and ordinary topcoats are easily corroded and discolored. Apply an additional coat of acid- and alkali-resistant water-based topcoat (suitable for pH 4-10) during application. Urine stains will disappear within 12 hours if wiped clean. Anti-scratch: Furniture feet with "anti-scratch pads." Place non-slip, non-grip mats under sofas and cat climbing frames to reduce scratching. If shallow scratches already occur, lightly sand with 1000-grit sandpaper and then wax to repair them.Easy to clean: Use a "pet-specific vacuum cleaner": Seamless floors don't harbor hair, so vacuum daily with a roller brush in the same direction to easily remove hair. Urine and vomit stains can be wiped away with a damp cloth and a neutral detergent to eliminate residual odor. 3. Tips for Avoiding Pitfalls: Don't Ignore Special Treatment for "Pet Activity Areas" Pet restroom area on the balcony: Create a 0.5% slope on the floor, sloping toward the drain to prevent urine accumulation. Use waterproof adhesive to seal the edges to prevent liquid from seeping into the wall. Pet feeding area: Partially thicken the floor (2mm) to enhance wear resistance and prevent scratches from the food bowl. Create a "circular colored sand mosaic" to clearly define the feeding area and facilitate cleaning.

Oil-based epoxy floor paint‌ is a high-performance floor coating, mainly composed of epoxy resin and special plasticizers. It has the characteristics of high strength, high toughness, wear resistance and corrosion resistance, and is widely used in places where high strength and wear resistance are required. Ingredients and Properties: The main ingredients of oil-based epoxy floor paint include epoxy resin and special plasticizers. Because its ingredients contain special plasticizers, it has excellent wear resistance and can resist the erosion of chemicals such as acids and alkalis to a certain extent, making it less susceptible to corrosion and discoloration.   Differences from water-based epoxy floor paint: Oil-based epoxy floor paint and water-based epoxy floor paint differ in many aspects:   Composition difference: Oil-based epoxy floor paint uses organic solvents as diluents, while water-based epoxy floor paint uses water as diluent   Odor difference: Oil-based epoxy floor paint has a pungent odor, while water-based epoxy floor paint is colorless and odorless.   Environmental performance: Oil-based epoxy floor paint contains harmful substances and poses a risk of environmental pollution, while water-based epoxy floor paint has stronger environmental performance and meets environmental protection requirements.   Drying time: Oil-based epoxy floor paint dries faster, usually in 6-12 hours, while water-based epoxy floor paint dries slower and takes 6-24 hours.   Application range: Oil-based epoxy floor paint is suitable for places where no one lives or there are fewer people around, while water-based epoxy floor paint is suitable for all kinds of indoor floor construction or renovation.

In modern buildings that pursue both beauty and practicality, water-based epoxy floor paint has become the first choice for floor decoration and protection in many places due to its environmental protection, wear resistance, corrosion resistance and other characteristics. However, the preparation work before construction is crucial and directly related to the final effect and service life of the floor. So, what should be paid attention to before applying water-based epoxy floor paint on cement floors? 1. Floor cleaning and repair Before applying water-based epoxy floor paint, the first task is to ensure that the cement floor is thoroughly cleaned and repaired. Cement residues, mortar, grease and other impurities on the ground need to be thoroughly removed, especially grease impurities, which need to be wiped clean with a special solvent to avoid affecting the adhesion of the coating. At the same time, the ground is polished to increase the surface roughness and improve the adhesion of the coating. In addition, check whether the ground has hollows, cracks or sanding. If so, it needs to be repaired in time to ensure that the ground is flat and solid.     2. Environmental conditions and primer painting The construction environment also has a profound impact on the quality of water-based epoxy floor paint. Before construction, it is necessary to ensure that the ambient temperature is above 4°C, the optimal construction temperature is 10-25°C, and the humidity should not exceed 80%, and construction on rainy days should be avoided. At the same time, the ground needs to be kept dry and the water content is less than 10%. Primer painting is the basis of floor construction. It is necessary to select qualified water-based epoxy primers and apply them evenly with a brush. Pay attention to following a certain direction to ensure the beauty and uniformity of the coating. After applying the primer, you need to wait for it to fully cure before proceeding with subsequent construction.