Water-Based Epoxy Colored Sand Floor Paint Maintenance Guide: 5 Tips for 10-Year-Like-New Use

1. Daily Cleaning: "Be Gentle" to Avoid Damaging the Grain Texture

 Tools: For daily dusting, use a soft broom or dust mop (avoid hard-bristled brushes, which can diminish the surface gloss). Mop with a well-wrung cotton mop or microfiber cloth (moisture content ≤ 30% to prevent water from seeping into the gaps between the colored sand).

 Cleaning Agents: Use only neutral detergents (such as dishwashing liquid or neutral floor cleaner) diluted before use. Avoid using strong acids (such as toilet cleaners) or strong alkalis (84 disinfectant), as they can corrode the surface resin layer, exposing the colored sand and causing discoloration.

 Cleaning Frequency: For residential spaces, dust and mop once or twice a week. For commercial spaces (such as cafes and shopping malls), dust daily and mop every other day to prevent dust from accumulating and embedding in the gaps between the colored sand.

 2. Avoid "Hidden Damage": These actions shorten the lifespan of the floor.

 Sharp Object Protection: Use rubber protective pads on furniture legs to prevent scraping when dragging chairs. Avoid scratching with sharp objects such as knives and keys. If shallow scratches occur, lightly sand with 1000-grit sandpaper and then wax to repair them.

 Heavy Object Impact Taboos: Avoid parking overweight vehicles (such as trucks weighing over 5 tons) on garage floors for extended periods of time. When moving heavy items such as refrigerators and pianos around the home, use wooden planks or a cart to prevent excessive localized pressure that may cause cracking.

 High-Temperature Protection: Place hot items such as freshly cooked pots and electric heaters on an insulating mat (epoxy flooring can withstand temperatures ≤ 80°C; temperatures above this limit will soften and discolor). Protect balcony floors from direct sunlight (install sunshades to prevent the colored sand from fading due to prolonged exposure).

 3. Regular "Refreshing Maintenance": Keep the Floor in Top Condition

 Waxing Maintenance: Apply epoxy wax every 6 months (for homes) or 3 months (for commercial spaces). Apply evenly with a waxing machine and then polish. This not only enhances the gloss, but also forms a protective film on the surface, reducing wear.

 Crevicular Cleaning: The tiny gaps between colored sand particles can easily harbor oil and dust. Gently scrub with a toothbrush and a neutral detergent, then wipe dry with a damp cloth to prevent long-term accumulation of stains that can cause "blackening."

 4. Special Scenarios Maintenance: Address Targeted Pain Points

 Kitchen Floors: After each meal, wipe away grease around the stove to prevent it from seeping through. Deep clean the floor monthly with a neutral detergent, focusing on joints and corners.

 Garage Floors: Before parking your vehicle on snowy days, clear snow and sand from the tires to prevent melted debris from scratching the floor. Check the drains regularly to prevent water from soaking the edges of the floor.

 5. Regular Inspections: Early Detection and Addressing Problems

 Perform a comprehensive inspection every three months, focusing on areas prone to wear such as corners, doorways, and under furniture.

 If small areas of delamination (less than 5cm in diameter) occur, promptly fill them with a mixture of water-based epoxy repair agent and sand of the same color. After drying, sand them flat.

 If areas of discoloration occur, contact the original contractor to obtain sand from the same batch and apply a topcoat to prevent further color discrepancies.